ERIE, Pennsylvania - Eriez has two new additions to the company's successful line of Metalarm metal detectors: the Hawk and Eagle models. These rugged metal detectors are ideally suited for quarries, mines and other difficult aggregate installation locations, according to the manufacturer. Both models use pulse induction technology that offers balance coil detection sensitivity and performance.
The Hawk coil is typically used for standard applications with a sensitivity that is equal to approximately 5% of aperture height. Less sensitive settings are available upon request. The Hawk is designed for use on steel corded belts and can be operated with some conductive products such as metallic ore for more efficient protection.
The Eagle is used where higher sensitivities are required, and is capable of detecting a ferrous sphere equal to 2% of the aperture height.
The Hawk and Eagle are simple to install and are furnished with a Model 3600 control. During installation, there is no need to cut the conveyor belt, so production is not interrupted. A variety of options are available in the modular control panel design. Many features, including, exterior alarms, local or remote on/off, remote sensitivity control and a healthy signal relay, can be added. Both models can be manufactured to comply with Atex 22 for special locations.
For more information, call toll-free (888) 300-ERIEZ (3743) within the United States and Canada. For online users, visit www.Eriez.com or send e-mail to eriez@eriez.com.
Comments