Canadian Mining Journal



  • News

    DRIVES: IndraDrive Mi with new cooling options for extreme environments

    January 29, 2018 by Canadian Mining Journal

    BURLINGTON, Ont. –  The control cabinet-free IndraDrive Mi drive system from Rexroth allows for the realization of a completely independent drive solution. The supply unit that can be directly integrated into the machine makes this possible. Rexroth has now equipped

  • News

    HARDFACING: SSAB introduces Duroxite 100 overlay wire

    January 25, 2018 by Canadian Mining Journal

    SWEDEN – SSAB has launched Duroxite 100 wire, a flux-cored welding wire for hardfacing components subject to sliding wear and moderate to low impact applications using an open arc welding process. The wire is an ideal solution for companies that

  • ACID RUNOFF: Technical guidance for creating effective ground covers

    January 17, 2018 by Canadian Mining Journal

    AUSTRALIA – The Global Cover System Guidance Document, like the GARD Guide, is intended as a best practice summary to assist mine operators, designers, and regulators to address issues where cover systems can be employed. This document builds on previous

  • News

    MATERIAL HANDLING: Luff and SKF enter into first North American SKF Equipped partnership

    January 11, 2018 by Canadian Mining Journal

    CALGARY – Luff Industries is pleased to announce the strategic partnership with SKF and the introduction of the SKF Equipped program beginning 2018. For the first time in North America an original equipment manufacturer will be integrating SKF bearings into

  • News

    SOLVENT: Kluber Lubrication provides solution for lime deposit and water scale removal

    January 9, 2018 by Canadian Mining Journal

    LONDONDERRY, N.H. – Kluber Lubrication, a worldwide manufacturer of specialty lubricants, introduces Kluberplus Z 01-006 US, a water-based solvent containing wetting agents, corrosion inhibitors and degreasing compounds. Kluberplus Z 01-006 US can be used to safely remove lime deposits or water

  • News

    TAILINGS: Outotec creates three new products for sustainable tails and water management

    January 4, 2018 by Canadian Mining Journal

    FINLAND – Outotec has combined its expertise in the development of leading tailings and water treatment technologies to develop three new pre-engineered plant products, each one with Outotec’s proven and technologically advanced equipment at its heart. Bringing together services and

  • News

    VIRTUAL REALITY: Worksite VR training at Oyu Tolgoi mine

    January 2, 2018 by Canadian Mining Journal

    AUSTRALIA – Immersive Technologies developed a series of WorksiteVR Quest virtual reality scenarios designed to facilitate a blended learning model in conjunction with eLearning and practical activities. Mine site inductions are necessary however often dry, boring, and forgettable. Mining operations are now

  • News

    EQUIPMENT: Finning secures contract for Lundin’s Candelaria

    December 21, 2017 by Canadian Mining Journal

    CHILE –  Finning International of Vancouver announced last week that its South American operation has been awarded a multi-year mining contract by Lundin Mining Corp. to deliver new equipment and product support to the Candelaria copper mining complex in the

  • News

    TRUCK: Epiroc launches new Minetruck MT54 with high capacity haulage

    December 20, 2017 by Canadian Mining Journal

    MISSISSAUGA, Ont. – The most recent addition to Epiroc’s Minetruck series is the MT54, engineered for smart and efficient haulage. With a 54-tonne capacity, the MT54 has higher ramp speeds than its predecessor the MT5020. “Minetruck MT54 is based on

  • News

    MEASUREMENT: New solution from BinMaster for segmented silos

    December 20, 2017 by Canadian Mining Journal

    LINCOLN, Neb. – Managing inventory in pie-shaped segments of silos can be tricky, but there is an easy solution from BinMaster. New firmware for the 3DLevel Scanner acoustic senor applies the measured distances to a 3D model of vessel dimensions

  • News

    HYDRAULIC TOOLS: Atlas Copco’s hydraulic attachments division to be part of Epiroc

    December 19, 2017 by Canadian Mining Journal

    STOCKHOLM – Beginning Jan. 1, 2018, the hydraulic attachment tools division within Atlas Copco will become part of the Epiroc, the company that Atlas Copco plans to dividend out in mid-2018. The division manufactures excavator attachment tools such as hydraulic breakers,

  • News

    PUMPS: Avoid catastrophic slurry pump cavitation

    December 18, 2017 by Canadian Mining Journal

    Cavitation is a serious – and seriously costly – issue that can occur in centrifugal slurry pumps. These tips can help you recognize and prevent cavitation damage in your system. Are you struggling with your centrifugal slurry pump? Maybe you’re